I Series Network Video Recorder User Manual, 030117NA
174
4.
Edit the selected eSATA property, or initialize it as required.
NOTE:
Two storage modes can be configured for the eSATA when it is used for Record/Capture. Refer to
Chapter Managing HDD Group
and
Chapter Configuring Quota Mode
for details.
Figure 230 Initialize Added eSATA
14.4
Managing HDD Group
14.4.1.
Setting HDD Groups
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
1.
Enter the Storage Mode interface, Menu > HDD > Advanced > Storage Mode.
2.
Set the
Mode
to Group, as shown in Figure 231.
Figure 231 Storage Mode Interface
3.
Click the
Apply
button and the following Attention box will pop up.
Figure 232 Attention for Reboot
4.
Click the
Yes
button to reboot the device to activate the changes.
5.
After rebooting the device, enter the HDD Information interface, Menu > HDD > General.
6.
Select HDD from the list and click the
icon to enter the Local HDD Settings interface, as shown
in Figure 233.