I Series Network Video Recorder User Manual, 030117NA
163
NOTE:
Before You Start. The RAID function should be enabled, refer to
Section 13.1.3.
As the default array type is RAID 5, please install at least three HDDs in your device.
If more than 10 HDDs are installed, two arrays can be configured.
1.
Enter the RAID configuration interface, Menu > HDD > RAID.
Figure 204 Physical Disk Interface
2.
Check the corresponding HDD No. checkbox to select it.
3.
Click the
One-touch Create
button to enter the One-touch Array Configuration interface.
Figure 205 One-Touch Array Configuration
4.
Edit the array name in the
Array Name
text filed and click
OK
button to start configuring array.
NOTE:
If you install four HDDs or above for one-touch configuration, a hot spare disk will be
set by default. It is recommended to set a hot spare disk to automatically rebuild the
array when the array is abnormal.
5.
When the array configuration is done, click the
OK
button in the pop-up message box to finish.