I Series Network Video Recorder User Manual, 030117NA
150
Figure 183 Installed Certificate Property
6.
Check the checkbox to enable the HTTPS function.
7.
Click the Save button to save the settings.
12.2.9.
Configuring E-Mail
The system can be configured to send an e-mail notification to all designated users if an alarm event is
detected, etc., an alarm or motion event is detected, or the administrator password is changed.
Before configuring the e-mail settings, the NVR must be connected to a local area network (LAN) that
maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet
depending on the location of the e-mail accounts to which you want to send notification.
1.
Enter the Network Settings interface, Menu > Configuration > Network.
2.
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, and the Preferred DNS Server in the
Network Settings menu, as shown in Figure 184.
Figure 184 Network Settings Interface
3.
Click
Apply
to save the settings.
4.
Select the e-mail tab to enter the Email Settings interface.