I Series Network Video Recorder User Manual, 030117NA
146
Figure 177 SNMP Settings Interface
3.
Check the
SNMP
checkbox to enable this feature.
4.
Enabling SNMP may cause security problems. Click
Yes
to continue or
No
to cancel the operation.
Figure 178 SNMP Settings Interface
5.
When you choose the Yes option in Step 4, configure the following SNMP settings:
• Trap Address:
IP Address of SNMP host
• Trap Port:
Port of SNMP host
6.
Click the
Apply
button to save and exit the interface.
NOTE:
Before setting the SNMP, download the SNMP software and manage to receive the
device information via SNMP port. By setting the Trap Address, the NVR is allowed to
send the alarm event and exception message to the surveillance center.
12.2.7.
Configuring More Settings
1.
Enter the Network Settings interface, Menu > Configuration > Network.
2.
Select the
More Settings
tab to enter the More Settings interface.