I Series Network Video Recorder User Manual, 030117NA
143
4.
Register the Account.
•
Using Mobile Phone Number:
1
）
Click Register by Mobile Phone Number.
2
）
Click on your country to display checkmark, then click
Finish
.
3
）
Enter your mobile phone number, then press
Get Verification Code
button.
4
）
Check your phone for the verification code that was texted, and enter it into the “Input the
received verification code” field, then click the
Next
button.
5
）
Create user name and password, re-type confirmation password, then click
Finish
button.
•
Using E-Mail Address:
1
）
Click Register by E-Mail Address.
2
）
Click on your country to display checkmark, then click the
Finish
button.
3
）
Enter your e-mail address, then click the
Next
button.
4
）
Check your e-mail for the verification code that was texted, and enter it into the “Input the
received verification code” field, then click the
Next
button.
5
）
Create user name and password, re-type confirmation password, then click
Finish
button.
12.2.2.
Enable Hik-Connect P2P on the NVR.
1.
Go to Main Menu > System Configuration > Network > Platform Access.
2.
Check the
Enable
checkbox.
3.
Server Address must be “dev.hik-connect.com.” If not, check the
Custom
checkbox, and type
“dev.hik-connect.com.”
4.
To turn
Enable Stream Encryption
on, select its checkbox.
5.
Click the
Apply
button. Status will change to “Online” (if all settings are correct).
6.
Note the Serial Number and Verification Code shown here (for use when registering the NVR in your
Hik-Connect account) or use the QR code displayed.