I Series Network Video Recorder User Manual, 030117NA
125
Figure 157 Face Detection
4.
Select Face Detection as the VCA detection type.
5.
Check the Enable checkbox to enable this function.
6.
Click
Set
button to enter the face detection settings interface. Configure the trigger channel, arming schedule,
and linkage action for the face detection alarm. Refer to Step 3 through Step 5 of Chapter 8.1 Setting Motion
Detection Alarm for detailed instructions.
7.
Click the Rule Settings button to set the face detection rules. You can click-and-drag the slider to set the
detection sensitivity.
•
Sensitivity: Range [1-5]. The higher the value, the more easily the face will be detected.
Figure 158 Set Face Detection Sensitivity
8.
Click Apply to activate the settings.