HIKVISION DS-7600NI-K1 User Manual Download Page 194

Page: 194 / 226

Network Video Recorder User Manual

193

Chapter 13 Camera Settings

13.1 Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time,
camera name, etc.

Step 1

Enter the OSD Configuration interface.

Menu > Camera > OSD

Step 2

Select the camera to configure OSD settings.

Step 3

Edit the Camera Name in the text field.

Step 4

Configure the Display Name, Display Date and Display Week by clicking the checkbox.

Step 5

Select the Date Format, Time Format and Display Mode.

Figure 13-1

OSD Configuration Interface

Step 6

You can use the mouse to click and drag the text frame on the preview window to adjust the
OSD position.

Step 7

Click the Apply button to apply the settings.

Summary of Contents for DS-7600NI-K1



































































































































































































































Search results

Summary of Contents for DS-7600NI-K1

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600NI-K1, User Manual

Search results

Summary of Contents for DS-7600NI-K1

Reviews:

Brands by name

Popular brands