manualshive.com logo in svg

HIKVISION DS-7600NI-K1/4G Series, User Manual

Share
Download
HIKVISION DS-7600NI-K1/4G Series User Manual Download Page 52

Figure 5-23 Upload Longitude and Latitude Info

2. Check Enable Upload.

3. Set Upload Interval.

Upload Interval

The device will automatically upload longitude and latitude information to the platform

according to the time interval.

4. Click Apply.

5.6 Smart Encoding

5.6.1 Channel-Zero Encoding

Channel-zero encoding refers to local output encoding for network transmission. In order to

decrease the bandwidth requirement without affecting the image quality, channel-zero encoding

provides a combined live image of multiple channels. Users can view the videos from channel-zero

remotely. Division capacity is depended on output videos and bandwidth on upper bitrate limit.
Go to Configuration → Smart Encoding → Channel-Zero to enable the function and configure

parameters.

Network Video Recorder User Manual

39

Summary of Contents for DS-7600NI-K1/4G Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands