Network Video Recorder User Manual
219
Figure 13-4
One-touch Array Configuration
Step 4
Edit the array name in the
Array Name
text filed and click
OK
button to start configuring
array.
If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It
is recommended to set hot spare disk for automatically rebuilding the array when the array is
abnormal.
Step 5
When the array configuration is completed, click
OK
button in the pop-up message box to
finish the settings.
Step 6
You can click
Array
tab to view the information of the successfully created array.
By default, one-touch configuration creates an array and a virtual disk.
Figure 13-5
Array Settings Interface
Step 7
A created array displays as an HDD in the HDD information interface.
Figure 13-6
HDD Information Interface
13.1.4 Manually Creating Array
Purpose:
You can manually create the array of RAID 0, RAID 1, RAID 5, RAID6 and RAID 10.