Digital Video Recorder User Manual
74
3.2.2
Main/Aux Output Switching
Only the DS-7200/7300/8100HQHI-F/N and DS-7200/7300/8100/9000HUHI-F/N series
support Aux/Main output switch.
When the HDMI1/VGA and HDMI2 (for DS-7300/8100/9000HUHI-F/N) or HDMI/VGA (for
DS-7200/7300/8100HQHI-F/N and DS-7200HUHI-F/N series) output is configured as the
main output, you can perform the following operation to switch to CVBS output as the main
output.
Step 2
Use the mouse wheel to double-click on the HDMI1/VGA and HDMI2 (for
DS-
7300/8100/9000HUHI-F/N
) or HDMI/VGA (for DS-7
200/7300/8100HQHI-F/N and
DS-7
200HUHI-F/N
series) output screen, and the following message box pops up.
Figure 3-2
Switch Main and Aux Output
Step 3
Use the mouse wheel to double-click on the screen again to switch to the Aux output, or
click
Cancel
to cancel the operation.
Step 4
Select the
Menu Output Mode
to
Main CVBS
from the right-click menu on the monitor.
Step 5
On the pop-up message box, click
Yes
to restart the device to enable the CVBS output as the
main output.
You can select the
Menu Output Mode
under Menu>Configuration>General>More Settings to
Auto
, or
HDMI1/VGA
and
HDMI2
(for DS-7300/8100/9000HUHI-F/N) or
HDMI/VGA
(for
DS-7200/7300/8100HQHI-F/N and DS-7200HUHI-F/N series) and then restart the device to switch
the main output back to HDMI1/VGA, HDMI2 or HDMI/VGA output.
3.2.3
Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you click the
screen.
Figure 3-3
Quick Setting Toolbar
You can refer to Table 3.5 for the description of Quick Setting Toolbar icons.
