Digital Video Recorder User Manual
238
For DS-7300/8100/9000HUHI-F/N series,
VGA/HDMI1 Resolution
and
HDMI2
Resolution
can be configured separately. Up to 1920 × 1080/60 Hz resolution
is supported for VGA/HDMI1 output and up to 4K (3840 × 2160)/30 Hz
resolution is supported for HDMI2 output.
You can select 2K (2560 × 1440)/60 Hz and 4K (3840 × 2160)/30 Hz VGA/HDMI
resolution for DS-7116HQHI-F1/N, DS-7216HQHI-F1/N, DS-7216HQHI-F2/N,
DS-7208HUHI-F1/N, DS-7208HUHI-F2/N, DS-7216HUHI-F2/N,
DS-7300HQHI-F4/N and DS-8100HQHI-F8/N.
•
Time Zone:
Select the time zone.
•
Date Format:
Select the date format.
•
System Date:
Select the system date.
•
System Time:
Select the system time.
•
Mouse Pointer Speed:
Set the speed of mouse pointer; 4 levels are
configurable.
•
Enable Wizard:
Enable/disable the Wizard when the device starts up.
•
Enable Password:
Enable/disable the use of the login password.
Step 4
Click the
Apply
button to save the settings.
17.2 Configuring RS-232 Serial Port
The RS-232 serial port is supported by DS-7300HQHI-F4/N, DS-8100HQHI-F8/N and
DS-7300/8100/9000HUHI-F/N series DVR.
Purpose
The RS-232 port can be used in two ways:
•
Parameters Configuration: Connect a PC to the NVR through the PC serial port.
Device parameters can be configured by using software such as HyperTerminal.
The serial port parameters must be the same as the NVR’s when connecting with
the PC serial port.
•
Transparent Channel: Connect a serial device directly to the NVR. The serial
device will be controlled remotely by the PC through the network and the
protocol of the serial device.
Step 1
Enter the RS-232 Settings interface.
Menu > Configuration > RS-232
