Digital Video Recorder User Manual
204
Step 4
Edit the array name in the
Array Name
text filed and click
OK
button to start
configuring array.
If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set
by default. It is recommended to set hot spare disk for automatically rebuilding the
array when the array is abnormal.
Step 5
When the array configuration is completed, click
OK
button in the pop-up
message box to finish the settings.
Step 6
You can click
Array
tab to view the information of the successfully created
array.
By default, one-touch configuration creates an array and a virtual disk.
Figure 13-5
Array Settings Interface
Step 7
A created array displays as an HDD in the HDD information interface.
Figure 13-6
HDD Information Interface
13.1.3
Manually Creating Array
Purpose
You can manually create the array of RAID 0, RAID 1, RAID 5, RAID6 and RAID 10.
In this section, we take RAID 5 as an example to describe the manual configuration of
array and virtual disk.
Step 1
Enter the Physical Disk Settings interface.
Menu > HDD > RAID > Physical Disk
