HIKVISION DS-7208HUHI-K1S User Manual Download Page 204

Page: 204 / 302

Digital Video Recorder User Manual

203

13.1.2

One-touch Configuration

Purpose

Through one-touch configuration, you can quickly create the disk array. By default,
the array type to be created is RAID 5.

Before you start

The RAID function should be enabled, please refer to the Chapter 13.1.1 for
details.

As the default array type is RAID 5, please install at least 3 HDDs in you device.

If more than 10 HDDs are installed, 2 arrays can be configured.

Step 1

Enter the RAID configuration interface.

Menu > HDD > RAID

Figure 13-3

Physical Disk Interface

Step 2

Check the checkbox of corresponding HDD No. to select it.

Step 3

Click the

One-touch Config

button to enter the One-touch Array Configuration

interface.

Figure 13-4

One-touch Array Configuration

Summary of Contents for DS-7208HUHI-K1S















































































































































































































































































































Search results

Summary of Contents for DS-7208HUHI-K1S

Reviews:

Related manuals for DS-7208HUHI-K1S

Brands by name

Popular brands

HIKVISION DS-7208HUHI-K1S, User Manual

Search results

Summary of Contents for DS-7208HUHI-K1S

Reviews:

Related manuals for DS-7208HUHI-K1S

Brands by name

Popular brands