Digital Video Recorder User Manual
162
Figure 10-1
Face Detection
Step 3
Select the VCA detection type to
Face Detection
.
Step 4
Click
to enter the face detection settings interface. Configure the trigger channel, arming
schedule and linkage action for the face detection alarm. Please refer to step3~step5 of
Chapter 8.1 Setting Motion Detection
for detailed instructions.
Step 5
Click the
Rule Settings
button to set the face detection rules. You can drag the slider to set
the detection sensitivity.
Step 6
Sensitivity:
Range [1-5]. The higher the value is, the more easily the face can be detected.
Figure 10-2
Set Face Detection Sensitivity
Step 7
Click
Apply
to activate the settings.
10.2 Vehicle Detection
Purpose
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Step 1
Enter the VCA settings interface.
Menu> Camera> VCA
Step 2
Select the camera to configure the VCA.
