Digital Video Recorder User Manual
136
12.2.1 Manual Time Synchronization
Steps
1. Go to System → General.
2. Configure the date and time.
3. Click Apply to save the settings.
12.2.2 NTP Synchronization
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the system’s date and time accuracy.
Steps
1. Go to System → Network → TCP/IP → NTP.
2. Check Enable.
3. Configure NTP settings as need.
Interval (min)
Time interval between two time synchronization with NTP server
NTP Server
IP address of the NTP server
NTP Port
Port of the NTP server
4. Click Apply
12.2.3 DST Synchronization
DST (daylight saving time) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard time (ST).
Steps
1. Go to System → General.
2. Check Enable DST.
3. Set DST mode as Auto or Manual.
Auto
Automatically enable the default DST period according to the local DST rules.
Manual
Manually set the start time and end time of the DST period, and the DST bias.
Summary of Contents for DS-7204HQHI-K1
Page 1: ...Digital Video Recorder User Manual ...
Page 184: ...UD30030B ...
