HIKVISION DS-7204HQHI-K1 Page 145 User Manual Download

Page: 145 / 184

Digital Video Recorder User Manual

125

6. Check Export of GUID File to export the GUID file for the admin user account.

Note

When the admin password is changed, export the new GUID to the connected USB flash drive in
the Import/Export interface for the future password resetting.

7. Configure security question for password resetting.
8. Configure reserved email for password resetting.
9. Click OK to save the settings.

11.1.3 Edit an Operator/Guest User

You can edit the user information, including user name, password, permission level, and MAC
address.

Steps
1. Go to System → User.
2. Select a user from the list and click Modify.

Figure 11-2 Edit User (Operator/Guest)

3. Edit the user information as desired, including the new password (strong password is required)

and MAC address.

4. Click OK.

Summary of Contents for DS-7204HQHI-K1

























































































































































































Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands

HIKVISION DS-7204HQHI-K1, User Manual

Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands