HIKVISION DS-7200HVI, User Manual, Page: 55 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR
54
5.3 Configuring Motion Detection Record
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event
takes place, the device can analyze it and do many actions to handle it. Enabling motion detection function can
trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the
surveillance center and so on. In this chapter, you can follow the steps to schedule a record which triggered by
the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
Figure 5.12 Motion Detection
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection .
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for
all the area shot by the camera, click Full Screen . To clear the motion detection area, click Clear .
Figure 5.13 Motion Detection- Mask
4) Click Handling , and the message box for channel information will pop up.
alarm shop