HIKVISION DS-7200HVI User Manual Download Page 32

Page: 32 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start all-day normal recording or motion detection recording for all channels.

Quick Set

Set the video output mode to Standard, Bright, Gentle or Vivid.

All-day Playback

Play back the video of the selected channel.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main output is

disabled.

Note:

The

dwell time

of the live view configuration must be set before using

Start Auto-switch

Note:

If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled;

you need to switch back to the Main output with the

VOIP

button and

Enter

button on IR remote control.

Note:

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when

right-clicking mouse on this camera.

3.2.2 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:

•

Single Screen:

Switch to a full screen display of the selected camera. Camera can be selected from a

dropdown list.

•

Multi-screen:

Switch different display layout options. Layout options can be selected from a

dropdown list.

•

Next Screen:

When displaying less than the maximum number of cameras in Live View, clicking this

feature will switch to the next set of displays.

•

PTZ:

Enter PTZ Control mode.

•

Main Monitor:

Enter Main operation mode.

Note:

In the live view mode of the main output monitor, the menu operation is not available while Aux output

mode is enabled.

3.2.3 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you right-click mouse on the

camera.

Figure 3.2 Quick Settings Toolbar

Table 3.3 Description of Quick Setting Toolbar Icons

Icons

Description

Icons

Description

Icons

Description

Enable Manual

Record

Instant Playback

Mute/Audio on

PTZ Control

Digital Zoom

Image Settings

alarm shop

Summary of Contents for DS-7200HVI












































































































































































Search results

Summary of Contents for DS-7200HVI

Reviews:

HIKVISION DS-7200HVI, User Manual, Page: 32 / 171

Search results

Summary of Contents for DS-7200HVI

Reviews: