manualshive.com logo in svg

HIKVISION DS-7108HI series, User Manual, Page: 7 / 108

Share
Download
HIKVISION DS-7108HI series User Manual Download Page 7

 

7

 

Chapter2 Installation 

Warning: Before you install the DVR, please make sure the power of DVR is 
switched off. 

2.1 

Checking the DVR and Its Accessories 

When you get the product, check that all the items are included in your product 

package. There is a list in the package. If any of the items is missing, please contact 
your dealer. 

2.2 HDD 

Installation 

Installation notice 

The DVR has not HDD when leaving factory. Based on the record schedule, you 

can calculate the total capacity you need (refer to Appendix A). Please ask the 
specialist to disassembly the DVR and install HDD. 

 

Installation instrument 

One cross screw driver. 

 

HDD installation 

1.

 

Open the DVR box. 

2.

 

Place the HDD on the mounting plate. 

3.

 

Connect the ATA data cable correctly. The cable has three connectors for 
DVR main board, master HDD and slaver HDD.   

4.

 

Plug the HDD power connector. 

5.

 

Cover and fix the DVR box. 

 

Note: After you install the HDD, you must format them. Please refer to 

section 6.4

.

 

Summary of Contents for DS-7108HI series













































































































Reviews:

No comments