manualshive.com logo in svg

HIKVISION DS-7108HI series, User Manual, Page: 68 / 108

Share
Download
HIKVISION DS-7108HI series User Manual Download Page 68

 68

5.14 Network Parameters 

If you want use network to access DVR, you must setup network parameters.   

Note: If any network parameter is modified, you must save and reboot DVR to make it into 

effective. 

In main menu, move “Active Frame” to “Network” icon and press

【

ENTER

】

, you can enter 

into “Network” menu as following: Shown as fig 5.27 

 

Fig 5.27 network setup 

“Network” menu description: 

 

 

IP address: 

This IP address must not be conflict with other IP. If there is DHCP server in 

network, you can set the IP as “0.0.0.0”, save and reboot DVR. In reboot process, DVR will 

search the DHCP server and get one dynamic IP address. This item will display the dynamic IP 

address. If DVR uses PPPoE function, also DVR can dialup into internet and this item will display 

the dynamic internet IP address.   

 

Port: 

Network access port number, must be greater than 2000. 

 

Mask: 

This is sub net mask. 

 

Gateway: 

The gateway IP is used to communicate in different network segments 

 

Summary of Contents for DS-7108HI series













































































































Reviews:

No comments