HIKVISION DS-7108HI series, User Manual, Page: 56 / 108

56
press
【
EDIT
】
, you will find the yellow pane is turned into black pane. You can use
【↓】【→】
key to enlarge or shrink the blue area. Press
【
EDIT
】
key to clear this part motion area.
Press
【
Enter
】
key to save and return “Image” menu. Press
【
ESC
】
to cancel.
Clear all motion areas: Press
【
A
】
key to clear all motion areas of this channel.
The keys used to setup motion areas are following:
z 【↑】【↓】 【←】【→】
: Move yellow panel to any position;
z 【
EDIT
】
:Yellow panel and red panel switch key:;
z 【→】
: Right enlarge red pane;
z 【←】
: Left shrink red pane;
z 【↓】
: Down enlarge red pane;
z 【↑】
: Up shrink red pane;
z 【
PTZ
】
: Set whole screen as motion area;
z 【
A
】
: Clear all motion areas;
z 【
ENTER
】
: Save and return “Image Setup” menu;
z 【
ESC
】
: Cancel setup and return “Image Setup” menu;
Step 5: Motion alarm policy: Move “Active Frame” to the corresponding “Policy” button of
motion detection alarm, press
【
ENTER
】
key to enter into “Motion Alarm Handle” menu: Shown as
fig 5.18
Fig 5.18 Motion alarm handle setup
Step 6: Motion alarm record channel setup: When there is motion alarm happened, you
can trigger related camera to start to record. In “Motion Alarm Handle” menu, you can select one
or more record channels. Please use
【
ENTER
】
or
【
EDIT
】
key to enable the flag into “
9
”.