HIKVISION DS-7108HI series, User Manual, Page: 12 / 108

12
panel is turned into green, it means you can use IR controller to operate this DVR.
Stop using IR controller
When IR controller status is on, press
【
DEV
】
key again, the “STATUS” lamp will
be turned off. The IR controller can not control this DVR.
Switch the DVR off
When IR controller status is on, press
【
POWER
】
key for several seconds, the
DVR will be powered off.
When IR controller can not work normally
z
Check batteries poles.
z
Check the remaining charge in the batteries.
z
Check IR controller sensor is mask.
z
Please change another IR controller to try again. It the problem is still existed,
please contact administrator.