2
3
Quick Operation Guide of Network Video Recorder
No.
Name
Description
Start Live View
Steps:
1.
In the live view window, select a playing window by clicking the mouse.
2.
Double click a camera from the device list to start the live view.
3.
You can click the
button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
4
5
Live View Window
Displays the image of channel, and multi-window division is supported.
Play Control Bar
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
PTZ Control
PTZ function can only be realized if the connected camera supports
PTZ control.
Video Parameters
Brightness, contrast, saturation and hue of the image can be edited.
Configuration
Icon
Description
Icon
Description
Select the window-division
mode
/
Start/Stop all live view
Capture pictures in the live
view mode
/
Start/Stop all recording
Previous page
Next page
/
Open/Close audio
/
Start/Stop two-way audio
Adjust volume
/
Enable/Disable digital zoom
Full-screen
Recording
Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1.
Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of
Enable Schedule
to enable recording schedule.
4.
Choose the day in a week to configure scheduled recording.
5.
Click
Edit
to edit record schedule
.
1) Configure All Day or Customize record:
14
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]