HIKVISION DS-7104HGHI-SH User Manual Download

Page: 68 / 242

Digital Video Recorder User Manual

4.2

Setting PTZ Presets, Patrols and Patterns

Before you start:

Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

4.2.1

Customizing Presets

Purpose:

Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.

Steps:

Enter the PTZ Control interface.

Menu>Camera>PTZ

Figure 4. 3

PTZ Settings

Use the directional button to wheel the camera to the location where you want to set preset; and the zoom

and focus operations can be recorded in the preset as well.

Enter the preset No. (1~255) in the preset text field, and click the

Set

button to link the location to the preset.

Repeat the steps2-3 to save more presets.

You can click the

Clear

button to clear the location information of the preset, or click the

Clear All

button

to clear the location information of all the presets.

4.2.2

Calling Presets

Purpose:

This feature enables the camera to point to a specified position such as a window when an event takes place.

Steps:

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands