Network Video Recorder User Manual
43
●
The parameters of Main Stream (Event) are read-only.
●
You can enable the ANR (Automatic Network Replenishment) function via the web browser
(Configuration → Storage → Schedule Settings → Advanced) to save the video files in the IP
camera when the network is disconnected, and synchronize the files to the NVR when the
network is resumed.
3. Set Sub-stream Parameters.
1.
Enter the Substream tab page.
Figure 4-5 Sub-stream Parameters
2.
Configure the parameters of the camera.
3.
Click Apply.
4.2 Configure Recording Schedule
Set the record schedule, and then the camera automatically starts/stops recording according to
the configured schedule.
we take the record schedule procedure as an example, and the same procedure can be applied to
configure schedule for both recording and capture. To schedule the automatic capture, you need
to choose the Capture tab in Schedule interface.
Steps
1. Enter the Record Schedule interface:Menu → Record → Schedule.
2. Configure Record Schedule.
1.
Select Record Schedule.Different recording types are marked in different color icons.
Continuous
Scheduled recording.
Event
Recording triggered by all event triggered alarm.
