6.3 Camera Management
6.3.1 Configure Signal Input
For certain models of Digital Video Recorder (DVR), you can configure the analog and IP signal
input types.
Steps
1. Go to Configuration → Camera → Analog .
2. Select signal input type as HD/CVBS or IP.
HD/CVBS
Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be
connected randomly for the channel.
IP
Network camera can be connected for the channel.
3. Click Advanced Settings to set parameters as your desire.
Enhanced IPC Mode
If the option is checked, the maximum number of IP channel will increase. But it will make
smart events unavailable in analog camera.
Enhanced VCA Mode
If the option is checked, it will maximize the number of line crossing detection and intrusion
detection in analog channel.
4MP Lite Mode
If the option is checked, image of 4 MP or below resolution can be encoded in full frame rate.
1080P Lite Mode
If the option is checked, signal of1080p resolution is available for the analog channels.
4. Click Apply. You can view the maximum network camera accessible number in Max. IP Camera
Number.
6.3.2 Network Camera
Activate Network Camera
Only activated network cameras can be added.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
Digital Video Recorder User Manual
44
