User Manual of DS-6600 Audio/Video Encoder
68
Chapter 9 Record Settings
Before you start
Make sure the Encoder is connected with HDD (for DS-6600HFI/HCI-SATA) or network disk, and the HDD or
network disk has been initialized for the first time to use. Please refer to
Section 7.3.5 Adding Network Disk
for
details.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording. For the manual recording, refer to
Section 6.1 Starting Live View
Steps:
1.
Click
Remote Configuration> Camera Settings> Record Schedule
to enter Record Schedule settings
interface.
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of
Enable Schedule
to enable recording schedule.
Figure 9.1 RS-485 Port Settings
4.
Choose the day in a week to configure scheduled recording.
5.
Click
Edit
to edit record schedule
.
