12
setIp
Function:
Configure the network. System will shut down access to DHCP mechanism automatically and
switch to static network configuration mode.
Format:
setIp “IP address”, “Subnet Mask”, “ Default Gateway”, “ Main DNS”, “Stand-DNS”,
“Command Port”, “http P”
Note:
Case-sensitive.
E.g. if you need to set IP address: 192.168.0.8, Subnet Mask: 255.255.248.0, Gateway: 192.168.0.1,
input setIp “192.168.0.8”, “255.255.248.0”, “192.168.0.1”, and type Enter to finish setting.
If you just want to set IP address of decoder: 192.168.0.188, Subnet Mask: 255.255.250.0, then input
setIP 192.168.0.188: 255.255.250.0, and type Enter to finish setting.
Note:
Case-sensitive, parameters need to be separated by commas.
3.2 Configuration by Client Software
Please confirm before configuration:
PC and decoder are connected by network line;
You have already got IP address of the decoder by Hyper Terminal and confirm that you can use
PING command.
Note: Please refer to the corresponding sections of client software for more details.
