Interactive Display
22
The appearance of the remote control is subject to change.
When using the remote control, aim the device at the sensor receiver. Any obstacle in between may
disturb normal operation.
Keep the control from strong vibration. Avoid direct sunlight when setting or placing the control,
otherwise it may be deformed.
The control may malfunction under direct or strong light condition. In this case, change the operating
direction or move closer to the sensor receiver.
Low battery reduces controlling distance, and new battery should be replaced. If the control will not
be used for a long time, take out the battery to avoid weeping which may damage the control.
Do not use batteries of different types together or mix new and old batteries. Always change the
batteries in pair.
Do not recharge, short-circuit, heat or disassemble batteries, or throw batteries into fire. Dispose of
batteries according to environmental regulations. Do not expose batteries to overheated
environment.
Mounting
Wall Mounting
The device can be installed using wall mount or mobile mount, as shown below.
Wall Mount Front View