HIKVISION DS-3WR12C, User Manual, Page: 10 / 147

WiFi Router • User Guide
2
Jack, ports, and button
Jack, ports and button description
Status Description
Blinking fast for 3 seconds
A wired device connecting to or disconnected from the
router
Jack/port/button Description
WPS/RST
Used for WPS negotiation or reset.

WPS: Press the button for 1 to 3 seconds, and enable the WPS
function of the WPS-enabled device within 2 minutes to establish
a WPS connection.

RST: Hold down the button for about 8 seconds and then release
it when the LED indicator blinks fast. The router is reset
successfully.
IPTV/3
10/100 Mbps auto-negotiation Ethernet port.
Used as a LAN port by default. Once the IPTV function is enabled, it
can only serve as an IPTV port to connect to a set-top box.
1,2
10/100 Mbps auto-negotiation LAN port.
Used to connect devices
.
WPS/RST, IPTV/3, 2, 1, WAN, POWER