HIKVISION DS-3E1510P User Manual Download

Page: 37 / 41

5.4 Configuration File Import

You can import the configuration file to configure the system easily.
Steps

1. Go to System Management → System Maintenance → Export & Import .

Figure 5-6 Export Configuration file

2. Click to select the configuration file.

3. Click Import.

The device will restart automatically to enter the login page when the configuration file is

imported.

5.5 Device Upgrade

You can upload the upgrade file to upgrade your switch.
Steps

1. Go to System Management → System Maintenance → Device Upgrade

Figure 5-7 Upgrade

2. Click to select an upgrade patch.

3. Click Upgrade.

Note

If upgrading failed or the device cannot function, please contact our technical support

engineers.

Result
The device will restart automatically to enter the login page when upgrade finished.

5.6 Log Management

System operation logs can be searched and exported for backup.

Gigabit PoE Switch Web User Manual

Summary of Contents for DS-3E1510P










































Search results

Summary of Contents for DS-3E1510P

Reviews:

Related manuals for DS-3E1510P

Brands by name

Popular brands

HIKVISION DS-3E1510P, User Manual

Search results

Summary of Contents for DS-3E1510P

Reviews:

Related manuals for DS-3E1510P

Brands by name

Popular brands