Chapter 7 Link Aggregation Configuration
Link aggregation is used to aggregate physical ports to create a logical channel. The advantages of
link aggregation are higher transmission rate with wider bandwidth.
Steps
1. Select → Link Aggregation → Load Balancing Configuration .
Figure 7-1 Load Balancing Configuration
Source and Destination MAC: Load balancing is performed based on source and destination
MAC addresses on all the packets.
2. Select → Link Aggregation → Aggregation Group .
Note
Only gigabit ports can be added into aggregation groups.
3. Click Add.
Figure 7-2 Add Aggregation Group
Gigabit PoE Switch Client User Manual
12