Chapter 6 Port Configuration
Select → Port Configuration to enter the interface.
Note
Different devices have different functions, so the actual interface shall prevail.
6.1 Attribute Configuration
The basic parameters can influence the working status of ports. Configure the bitrate, duplex, and
flow control, and enable or disable ports according to the actual situations in the Attribute
Configuration interface.
Bitrate
The data transmission rate of the port. The rate includes auto, 10 Mbps, 100 Mbps, and 1000
Mpbs. The default is Auto Negotiation. The configurable rate varies with different ports.
Duplex
The duplex mode of the port. Only Auto Negotiation is available for the current version.
Flow Control
Enabling the flow control can prevent data loss in data transmission. The default is Enable.
Enable
Enable or disable the port link. After you disable the port link, the data of the port stops
transmission, but the power is supplied for other devices.
Note
The rate, duplex, and flow control configuration of all ports must be the same in the aggregation
group .
6.2 PoE Port Configuration
You can enable PoE to supply power for the powered devices (PDs).
Note
Enabling or disabling PoE has no influences on data transmission of the port.
Gigabit PoE Switch Client User Manual
10