Network Bullet Camera
·
Quick Start Guide
41
6
Operating via Hik-Connect App
Purpose:
Hik-Connect is an application for mobile devices. With the App, you
can view live image of the camera, receive alarm notification and so
on.
Note:
Hik-Connect service is not supported by certain camera models.
6.1
Enable Hik-Connect Service on Camera
Purpose:
Hik-Connect service should be enabled on your camera before using
the service.
You can enable the service through SADP software or web browser.
6.1.1
Enable Hik-Connect Service via SADP Software
Steps:
1.
Check the checkbox of Enable Hik-Connect on:
1).
"Activate the Device" page during camera activation, refer to
Chapter 4.2.2.
2).
Or "Modify Network Parameters" page during modifying IP
address, refer to Chapter 4.3.
2.
Create a verification code or change the verification code.
Summary of Contents for DS-2XE6825G0-IZ
