HIKVISION DS-2XE6146F-HS User Manual Download Page 97

Page: 97 / 176

Network Camera User Manual

Day/Night Scheduled-Switch Configuration Interface

Steps:

Click the calendar icon to select the start time and the end time of the switch.

Notes:

•

The start time and end time refer to the valid time for day mode.

•

The time period can start and end on two days in a row. For example, if you

set start time as 10:00 and end time as 1:00, the day mode will be activated at

10 o'clock in the morning and stopped at 1 o'clock early in the next morning.

Click Common tab to configure the common parameters applicable to the day

mode and night mode.

Note:

For the detailed information of each parameter, please refer to

Section 9.1.1

Day/Night Auto-Switch.

Click Day tab to configure the parameters applicable for day mode.

Click Night tab to configure the parameters applicable for night mode.

Note:

The settings saved automatically if any parameter is changed.

Configuring OSD Settings

Purpose:

You can customize the camera name, time/date format, display mode, and OSD size

displayed on the live view.

Summary of Contents for DS-2XE6146F-HS

















































































































































































Search results

Summary of Contents for DS-2XE6146F-HS

Reviews:

HIKVISION DS-2XE6146F-HS, User Manual, Page: 97 / 176

Search results

Summary of Contents for DS-2XE6146F-HS

Reviews: