HIKVISION DS-2XE6146F-HS User Manual Download Page 37

Page: 37 / 176

Network Camera User Manual

Chapter 5

Live View

Live View Page

Purpose:

The live view page allows you to view the real-time video, capture images, realize

PTZ control, set/call presets and configure video parameters.

Live View

the menu bar of the main page to enter the live view page.

Descriptions of the live view page:

Toolbar

Live View

Window

Menu Bar

PTZ Control

Panel

Preset/Patrol

Settings

Live View Page

Menu Bar:

Click each tab to enter Live View, Playback, Picture, Application, and Configuration

page respectively.

Live View Window:

Display the live video.

Toolbar:

Toolbar allows you to adjust the live view window size, the stream type, and the

plug-ins. It also allows you to process the operations on the live view page, e.g.,

start/stop live view, capture, record, audio on/off, two-way audio, start/stop digital

zoom, etc.

Summary of Contents for DS-2XE6146F-HS

















































































































































































Search results

Summary of Contents for DS-2XE6146F-HS

Reviews:

HIKVISION DS-2XE6146F-HS, User Manual, Page: 37 / 176

Search results

Summary of Contents for DS-2XE6146F-HS

Reviews: