3.2
Power On and Off
Power On
Hold the POWER button for two seconds to
turn on the device.
Refer to the figure below for the main view of
the monocular.
Hot Spot Digital Zoom
Storage
Battery
Power Off
When the monocular is turned on, hold the
POWER button for two seconds to power off
the device.
3.3
Observe Thermal View
Steps:
1.
Power on the monocular.
2.
Hold the monocular and make sure the
eyepiece covers your eye.
3.
Slide the sight adjust knob to adjust the
diopter until the OSD text or image is
clear.
Note: You must perform the sight
adjustment before any further use of
the monocular.
4.
Point the monocular towards the target
of the view.
3.4
Others
Connect the thermal monocular to your PC
with USB cable, you can export the recorded
videos and captured snapshots.
