Wall Mounting
Ceilling Mounting
Install the Bracket onto the Wall
5. Adjust the camera to the optimal surveillance angle.
1) Loosen the pan adjusting screw to adjust panning position
[0° to 360° ]. Tighten the screw.
2) Loosen the tile adjusting screw to adjust the tilting
position [0° to 100° ]. Tighten the screw.
Pan Range
[0° to 360° ]
2
3
1
Tilt Range
[0° to 100° ]
Rotation Range
[0° to 360° ]
3) Loosen the rotation adjusting screw to adjust the rotation
position [0° to 360° ]. Tighten the screw.
3-axis Adjustment
Please loosen the screws slightly until you can adjust the
camera. Do NOT remove the screws from the bracket.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]