User Manual of Explosion-proof Dome
© Hikvision
65
5.
Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.
Setting the duration to 0 means that there’ no duration when speed dome tracks.
This function varies depending on different camera models.
6.
Click
to clear the settings.
5.4.9
Prioritize PTZ
Steps:
1.
Enter the Prioritize PTZ interface:
Configuration
>
PTZ
>
Prioritize PTZ
.
2.
Select Network or RS-485 from the dropdown list
3.
Set the delay time (Range 2-200s).
4.
Click
to save the settings.
5.4.10
Position Settings
Purpose:
You can set the position information in this interface.
Steps:
1.
Enter the Position Settings interface:
Configuration > PTZ > Position Settings
Figure 5-37
Position Settings