User Manual of Explosion-proof Dome
© Hikvision
93
6.3.4
Configuring Image Parameters Switch
This function varies depending on different camera models
Purpose:
You can configure
Link to Preset
or
Scheduled-Switch
in this interface.
Link to Preset:
Set the
time period and linked scene for the preset and check the corresponding checkbox to go to the
linked scene in the configured time period.
Scheduled-Switch:
Set the time period and linked
scene and it will go to the linked scene in the configured time period when you check the
corresponding checkbox.
Steps:
1.
Enter the Image Parameters Switch interface:
Configuration > Image > Image Parameters Switch
2.
Check the checkbox of
Link to Preset
or
Scheduled-Switch
to enable the function. (Only one
function can be enabled in the same time.)
3.
When you enable the function of
Link to Preset
, select one preset from the dropdown list,
check the corresponding checkbox, set the time period and the linked scene for the selected
preset. (Up to 4 periods can be configured for one preset.)
Figure 6-38
Link to Preset
Figure 6-39
Linked Scene
4.
When you enable the function of
Scheduled-Switch
, check the corresponding checkbox, set
the time period and the linked scene.
Figure 6-40
Schedule-Switch