User Manual of Network Speed Dome
© Hikvision
60
minimum of 8 characters, including upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your
product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Steps:
1.
Connect the network camera to your PC directly with a network cable.
2.
Enter the 802.1X Settings interface:
Configuration >
Advanced Configuration >
Network > 802.1X
Figure 6-17
802.1X Settings
3.
Check the
Enable IEEE 802.1X
checkbox to enable it.
4.
Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or the switch.
5.
Click
to finish the settings.
The camera reboots when you save the settings.
6.
After the configuration, connect the camera to the protected network.
6.3.7
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1.
Enter the QoS Settings interface:
Configuration >Advanced Configuration >
Network > QoS
Figure 6-18
QoS Settings
2.
Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and