Junction Box
Body
Figure 2-6
Secure the Junction Box on the Wall/Ceiling
6.
Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7.
Combine the junction box cover with its body.
Figure 2-7
Combine the Junction Box Cover back to its
Body
8.
Repeat the step 5 to 6 of 2.1.1 Ceiling/Wall
Mounting without Junction Box to finish the
installation.
2.2
Installation of Type II Camera
2.2.1
Ceiling/Wall Mounting without Junction Box
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes ceiling mounting as an
example.
Note:
For installation with junction box refers to 2.1.2
Ceiling/Wall Mounting with Junction Box.
Steps:
1.
Paste the drill template (supplied) to the place
where you want to install the camera.
2.
Drill the screw holes and the cable hole (optional)
on the ceiling according to the drill template.
Template
Side Opening
Screw Hole
Ceiling
Outlet
Figure 2-8
Drill Template