Dome
Camera
User Manual
www.hikvision.com
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
Type
Model
I
DS-2CE5582P(N), DS-2CE55C2P(N)
DS-2CE5582P(N)-IRP, DS-2CE55C2P(N)-IRP
DS-2CE5582P(N)-IR,DS-2CE55C2P(N)-IR
DS-2CE5682P(N)-IT3, DS-2CE56C2P(N)-IT3
II
III
IV
DS-2CE5582P(N)-VFIR3
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
DISCLAIMER STATEMENT
Underwriters Laboratories Inc. (”UL”
)
has not
tested the performance or reliability of the
security or signaling aspects of this product.
Regulatory Information
FCC Information
FCC compliance:
This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
UL Certification does not
performance or reliability of the
signaling aspects of this product UL MAKES NO
REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY OR SIGNALING RELATED FUNCTIONS
OF THIS PRODUCT.
cover the
security or
0100001030115
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation
.
EU Conformity Statement
This product and - if applicable -
the supplied accessories too are
marked with "CE" and comply
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery
that cannot be disposed of as
unsorted municipal waste in the
European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see:
www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology
.
It features high resolution
low image distortion and low noise etc
.
which
makes it suitable for surveillance system and
image processing system
.
●
High-performance sensor and high resolution
bring high-quality image
●
IR LED enables day night surveillance
●
Day/night auto switch
●
ATW brings high color rendition
●
Auto electronic shutter control to adapt to the
different surveillance environments
●
Auto gain control, adaptive brightness
●
High SNR brings high-quality image
●
Ingress protection: IP66
Type
Ⅰ
camera doesn’t support day night auto
switch and IP
.
DS-2CE5582P N IRP and DS- CE55C P N IRP
don’t support IP66.
,
,
,
/
Notes:
/
66
( )-
2
2 ( )-
1 Introduction
1.1 Product Features
1.2 Overview
2 Installation
Before you start
:
●
Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
●
Please make sure that all the related equipment
is power-off during the installation.
●
Check the specification of the products for the
installation environment
.
●
Check whether the power supply is matched
with your AC outlet to avoid damage.
●
If the product does not function properly, please
contact your dealer or the nearest service
center. Do not disassemble the camera for
repair or maintenance by yourself
.
●
Please make sure that the wall or the ceiling is
strong enough to withstand 3 times the weight
of the camera.
UD.6L0201D0172A01
therefore with the applicable harmonized
European standards listed under the Low Voltage
Directive 2006/95/EC, the EMC Directive 2004/
108/EC.
UL has only tested for fire, shock or casualty
hazards as outlined in Ul’s Standard(s) for Safety,
UL60950-1.
2002/96/EC (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Power
Cable
Power
Cable
Power Cable
Zoom
&
Focus
Video Cable
Video
Cable
Power Cable
Mounting
Base
Lock
Screw
Enclosure
Camera
TYPE
II
Enclosure
Trim Ring
Mounting
Base
Video
Cable
Enclosure
Trim Ring
Mounting
Base
Video
Cable
Camera
TYPE
III
Camera
Adjustable Screw
Black Liner
Lower
Dome
TYPE
IV
TYPE
I
Camera