Network Camera User Manual
116
desired time by either moving the time bar or input the exact time period.
3.
(Optional) Click
Delete
to delete the current arming schedule, or click Save to
save the settings.
4.
Move the mouse to the end of each day, a copy dialogue box pops up, and you
can copy the current settings to other days.
5.
Click Save to save the settings.
Note:
The time of each period can’t be overlapped. Up to 8 periods can be
configured for each day.
Linkage Method
1.
Check the checkbox to select the linkage method. You can enable the linkage
method Notify Surveillance Center when an event occurs.
Note:
The linkage methods vary according to the different camera models.
Figure 11-4
Linkage Method
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
(Optional) Reverse Counting Alarm
Steps:
1.
Check
Enable Reverse Entering Alarm
to enable the function. An alarm is
enabled when the target leaves the region.
2.
Set the arming schedule and linkage method.
