Network Camera User Manual
110
6.
Click
Linkage Method
and select the linkage methods for audio exception,
including Notify Surveillance Center, Send Email, Upload to FTP/Memory
Card/NAS, Trigger Channel for recording and Trigger Alarm Output.
7.
Click
Save
to save the settings.
Configuring Defocus Detection
Purpose:
The image blur caused by defocus of the lens can be detected, and some certain
actions can be taken when the alarm is triggered.
Note:
Defocus detection function varies according to different camera models.
Steps:
1.
Enter the Defocus Detection settings interface,
Configuration > Event > Smart
Event > Defocus Detection
.
Configuring Defocus Detection
2.
Check the checkbox of
Enable
to enable the function.
3.
Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the defocus
image can trigger the alarm.
4.
Select the linkage methods for defocus, including Notify Surveillance Center,
Send Email and Trigger Alarm Output.
5.
Click
Save
to save the settings.
Configuring Scene Change Detection
Purpose:
