Network Camera User Manual
86
9.4
Configuring Picture Overlay
Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image.
Steps:
1.
Enter the Picture Overlay Settings interface,
Configuration
>
Image
>
Picture
Overlay
.
Figure 9-8
Picture Overlay
2.
Click
Browse
to select a picture.
3.
Click
Upload
to upload it.
4.
Check
Enable Picture Overlay
checkbox to enable the function.
5.
Set X Coordinate and Y Coordinate values adjust the picture position on the
image. Adjust Picture Width and Picture Height to the desired size.
6.
Click
Save
to save settings.
Note
:
The picture must be in RGB24 bmp format and the maximum picture size is
128*128.