Video Security Control Panel User Manual
--52--
Only the No.1 partition is enabled as the default settings.
Partition Keypad User Settings
The programming command of keypad user configuration of the partition is shown as follows.
531 2 0
000
#
1
4
2
3
5
{1}
The programming command address of keypad user configuration is 531
～
538.
{2}
The configuration item of 2 indicates the keypad user configuration.
{3}
Add/Delete the user
Command
Command Description
Command
Command Description
0
Delete
1
Add
{4}
The user No.
{5}
End the command
Added Separately
: for instance, to add an user with the No. of 160 to the No.8 partition , the command
should be 538 2 1 160 #
Added/Deleted Continually
: only continuous adding or deleting operation is supported. After
adding/deleting a user separately, enter the command [P[User No.]+[#] to continually add/delete
users. For instance, to add users with the No. of 2,3,and 5, the command should be 538 2 1 002 # Project #
003 # Project # 005 #.
Added/Delete in Batch
: the formate is 531 2 x xxx xxx #.
Added with user No. interval
: for instance, to add users with the No. between 100~149 to the No.3
partition , the command should be 533.2.1.100.149 #.