Video Security Control Panel User Manual
--41--
Local Port Number Settings
3.1.10
The programming commands of local port number setting are as below:
474 0 8 0 0 0 #
1
2
4
6
3
5
7
{1}
The programming command address of local port number setting is: 474;
{2}
Port: Ten Thousands’ Digit
{3}
Port: Thousands’ Digit
{4}
Port: Hundreds’ Digit
{5}
Port: Tens’ Digit
{6}
Port: Digit
{7}
End the command.
Corresponding port number must be 5 bytes. When the place is not sufficient, fill it up with 0.
For example: When the port number is 6000, the programming command is: 474 06000#.
Sub-net Mask Settings
3.1.11
The programming commands of control panel sub-net mask setting are as below:
475 255 255 255 000 #
1
2
4
6
3
5
{1}
The programming command address of control panel sub-net mask setting is 475;
{2}
The First Unit;
{3}
The Second Unit;
{4}
The Third Unit;
{5}
The Fourth Unit;
{6}
End the command.