Video Security Control Panel User Manual
--32--
Chapter 3
Keypad Operation (Local
Operation
）
3.1
Alarm Keypad Settings
You should access the programming mode (only installer can access the programming mode) before keypad
configuration. The command is shown below:
012345 *0#
1
2
{1}
Installer Password: 012345
{2}
Command Key: *0 #
The command for exiting programming mode is *#.
Installer Password Settings
3.1.1
The password of installer is used for accessing programming and initializing mode. The command is shown below.
000 012345 #
1
2
3
{1}
Installer Password Programming Address: 000.
{2}
Installer Password: The default password is 012345. The configured password cannot be NULL,
but can be 0.
{3}
End the command.