HIKVISION DS-19A08-F/Kx, User Manual, Page: 44 / 157

Control Panel User Manual
44
3.1.18 Uploading Center Port Configuration
The programming command of uploading center port setting is shown below:
486 00000 #
1
2 3
{1} The programming command addresses of uploading center port
setting are: 486, 489, 492, 495;
Command Description Command Description
486 Programming
Address of Network
Center 1 Port
Settings
489 Programming
Address of Network
Center 2 Port
Settings
492 Programming
Address of WIFI
Center 1 Port
Settings
495 Programming
Address of WIFI
Center 2 Port
Settings
{2} Port number;
{3} End the command.
3.1.19 Center Protocol and Account Configuration
The programming command of center protocol and account setting is shown
below:
487 2 000000000 #
1 3
4
2
{1} The programming command addresses of center protocol and
account settings are: 487, 490, 493, 496;
Command Description Command Description